Skip to main content
Version: 3.1

csi-topology-cloud-drives

The CSI topology feature for FlashArray Cloud Drives (FACD) allows applications to provision and use cloud drives only on FlashArrays that are in the same zone as a given node. This improves fault tolerance for replicas, performance, and manageability for large clusters.

Prerequisites​

In order to use the CSI topology feature with a FlashArray Direct Access volume or FlashBlade Direct Access filesystem, you must meet the following prerequisites:

note

You cannot enable this feature on an existing Portworx installation.

  • Portworx Operator version 23.5.1 or newer.

  • One or more FlashArrays is reachable from worker nodes.

  • All nodes must have management access to all arrays.

  • All nodes must support iSCSI, FC, and NVMe technologies.

Enable CSI topology​

To enable CSI topology, specify the topology.portworx.io/zone label to describe the topology of each FlashArray.

Prepare your environment​

Before installing Portworx, it is essential to label your Kubernetes nodes with the correct topology, specifically indicating the zone for each FlashArray. This step is crucial for proper management and access control, especially when working with multiple FlashArrays.

  1. To label your nodes, run the following commands for each node, specifying the appropriate zone:

    kubectl label node <nodeName> topology.portworx.io/zone=zone-1
    kubectl label node <nodeName> topology.portworx.io/zone=zone-2

    Ensure that the nodes are labeled with the correct zone before installing Portworx on them. In setups like OpenShift Container Platform, this step becomes particularly important. If you are managing multiple FlashArrays and wanting to control node access to specific FlashArrays, then you can configure different MachineSets accordingly.

    By labeling the nodes, you help ensure proper topology-aware storage deployment and access control for the respective zones.

  2. Create a px-pure-secret containing the information for your FlashArrays with the topology.portworx.io/zone label. For example:

    {
      "FlashArrays": [
        {
          "MgmtEndPoint": "<managementEndpoint>",
          "APIToken": "<apiToken>",
          "Labels": {
            "topology.portworx.io/zone": "zone-1"
          }
        },
        {
          "MgmtEndPoint": "<managementEndpoint>",
          "APIToken": "<apiToken>",
          "Labels": {
            "topology.portworx.io/zone": "zone-2"
          }
        }
      ]
    }

Generate the specs​

  1. Navigate to Portworx Central and log in, or create an account.

  2. Select Portworx Enterprise from the product catalog and click Continue.

  3. On the Product Line page, choose any option depending on which license you intend to use, then select Continue to start the spec generator.

  4. Choose your Portworx version, platform, and click Customize at the bottom of the Summary section.

  5. Specify your cluster information on the Basic, Storage and Network pages.

  6. On the Customize page, specify the following in the Environment Variables tab:

    • Name: FACD_TOPOLOGY_ENABLED
    • Value: true

    Also, ensure that the Enable CSI checkbox is selected in the Advance Settings tab.
    Click Finish to create the specs.

Apply the specs and verify​

  1. Deploy the Operator:

    kubectl apply -f 'https://install.portworx.com/<version-number>?comp=pxoperator'
    serviceaccount/portworx-operator created
    podsecuritypolicy.policy/px-operator created
    clusterrole.rbac.authorization.k8s.io/portworx-operator created
    clusterrolebinding.rbac.authorization.k8s.io/portworx-operator created
    deployment.apps/portworx-operator created

  2. Deploy the StorageCluster:

    kubectl apply -f 'https://install.portworx.com/<version-number>?operator=true&mc=false&kbver=&b=true&kd=type%3Dgp2%2Csize%3D150&s=%22type%3Dgp2%2Csize%3D150%22&c=px-cluster-XXXX-XXXX&eks=true&stork=true&csi=true&mon=true&tel=false&st=k8s&e==AWS_ACCESS_KEY_ID%3XXXX%2CAWS_SECRET_ACCESS_KEY%3XXXX&promop=true'
    storagecluster.core.libopenstorage.org/px-cluster-xxxxxxxx-xxxx-xxxx-xxxx-8dfd338e915b created

  3. Verify if the cloud drives for a given node are provisioned on arrays that are in the same zone:

    pxctl sv pool show
    PX drive configuration:
    Pool ID: 0 
    Type:  Default 
    UUID:  xxxxxxxx-xxxx-xxxx-xxxx-0d1797392d56 
    IO Priority:  HIGH 
    Labels:  topology.portworx.io/zone=zone-2,beta.kubernetes.io/arch=amd64,medium=STORAGE_MEDIUM_SSD,iopriority=HIGH,topology.portworx.io/region=region-2,kubernetes.io/hostname=dev-leather-forger-1,kubernetes.io/arch=amd64,kubernetes.io/os=linux,beta.kubernetes.io/os=linux 
    Size: 250 GiB 
    Status: Online 
    Has metadata:  No 
    Balanced:  Yes
        ....

    You will see that Labels flag is set for your volumes.

Last updated on