Automatically expand Portworx storage pools for OpenShift with FlashArray

Summary and Key concepts

Summary:

This article explains how to use Portworx Autopilot to automatically expand storage pools when they begin running out of space. Autopilot monitors storage pool metrics (e.g., via Prometheus) and triggers resizing actions when high usage conditions are detected. The example provided demonstrates how to create an Autopilot rule that resizes a storage pool by 50% when its available capacity drops below 50%, up to a maximum of 400GiB. The article includes YAML specs for creating a PostgreSQL application with persistent volumes, configuring storage pools, and applying the Autopilot rule. It also provides monitoring instructions for tracking the rule's execution using Kubernetes events.

Kubernetes Concepts:

• PersistentVolumeClaim (PVC): A request for storage in Kubernetes. The example includes a PostgreSQL application with PVCs to demonstrate Autopilot's pool expansion feature.
• StorageClass: Specifies how storage is provisioned in Kubernetes. The article includes a Portworx storage class definition for PVC expansion.

Portworx Concepts:

• Autopilot: A feature that automates the expansion of storage pools and PVCs based on predefined rules and metrics.
• Storage Pool: A Portworx construct representing a collection of storage resources, which Autopilot can scale or rebalance.

You can use Autopilot to expand Portworx storage pools automatically when they begin to run out of space. Autopilot monitors the metrics in your cluster (e.g., via Prometheus) and detects high usage conditions. Once high usage conditions occur, Autopilot communicates with Portworx to resize the pool.

Autopilot uses Portworx APIs to expand storage pools, and these APIs are supported in the FlashArray.

Prerequisites

• Portworx cloud drives: Your Portworx installation must use one of the supported cloud drives where Portworx provisions the backing drives using the cloud provider
• Autopilot version: 1.2.13 and above

Example spec

You can use the auto scale type to automatically expand the Portworx storage pool. You can also specify the add-drive or resize-drive scale type based on your specific use case. You cannot use the add-drive operation if you are using the PX-StoreV2 backend.

In the following example, Autopilot rule uses the resize-drive scale type to expand a 250GiB Portworx storage pool composed of a single 250GiB drive by 50%:

apiVersion: autopilot.libopenstorage.org/v1alpha1
kind: AutopilotRule
metadata:
  name: pool-expand
spec:
  enforcement: required
  ##### conditions are the symptoms to evaluate. All conditions are AND'ed
  conditions:
    expressions:
    # pool available capacity less than 50%
    - key: "100 * ( px_pool_stats_available_bytes/ px_pool_stats_total_bytes)"
      operator: Lt
      values:
        - "50"
    # pool total capacity should not exceed 2TB
    - key: "px_pool_stats_total_bytes/(1024*1024*1024)"
      operator: Lt
      values:
       - "2000"
  ##### action to perform when condition is true
  actions:
    - name: "openstorage.io.action.storagepool/expand"
      params:
        # resize pool by scalepercentage of current size
        scalepercentage: "50"
        # when scaling, resize disks in the pool
        scaletype: "resize-drive"

Consider the key sections in this spec: conditions and actions.

The conditions section establishes threshold criteria dictating when the rule must perform its action. In this example, that criteria contains 2 formulas:

• 100 * ( px_pool_stats_available_bytes/ px_pool_stats_total_bytes) gives the pool available percentage and the Lt operator puts a condition that pool available capacity percentage should be lower 50%.
• px_pool_stats_total_bytes/(1024*1024*1024) gives the total pool capacity in GiB, and the Lt operator to caps it to 400GiB.`

Conditions are combined using AND logic, requiring all conditions to be true for the rule to trigger.

The actions section specifies what action Portworx performs when the conditions are met. Action parameters modify action behavior, and different actions contain different action parameters.

note

When you expand your storage pool using the add-drive scale type, Autopilot increases your pool storage capacity by adding new drives to the pool based on the scale percentage. The new drives will match the capacity of the existing ones because the storage pool consists of drives of equal size. For example, if your current pool consists of 100 GiB drive, with add-drive scale type, a 100 GiB drive is added to your pool, thus expanding it by 100%. In such cases, scale percentage represents the minimum percentage by which Portworx will scale up the pool. This note is only applicable if you are not using PX-StoreV2 as your backend.

Define and add Autopilot rule

Perform the following steps to deploy the above example.

Create application and PVC specs

note

The specs below create an application that writes 300 GiB of data to a 400 GiB volume. If your Storage pools are larger than that, you must change these numbers to ensure the capacity condition triggers.

First, create the storage and application spec files:

1. Create postgres-sc.yaml and place the following content inside it.

   ##### Portworx storage class
   apiVersion: storage.k8s.io/v1
   kind: StorageClass
   metadata:
     name: postgres-pgbench-sc
   provisioner: pxd.portworx.com
   parameters:
     repl: "2"
   allowVolumeExpansion: true
   

2. Create postgres-vol.yaml and place the following content inside it.

   kind: PersistentVolumeClaim
   apiVersion: v1
   metadata:
     name: pgbench-data
   spec:
     storageClassName: postgres-pgbench-sc
     accessModes:
       - ReadWriteOnce
     resources:
       requests:
         storage: 400Gi
   ---
   kind: PersistentVolumeClaim
   apiVersion: v1
   metadata:
     name: pgbench-state
   spec:
     storageClassName: postgres-pgbench-sc
     accessModes:
       - ReadWriteOnce
     resources:
       requests:
         storage: 1Gi

3. Create postgres-app.yaml and place the following content inside it.

   The application in this example is a PostgreSQL database with a pgbench sidecar. The SIZE environment variable in this spec instructs pgbench to write 300GiB of data to the volume. Since the volume is 400GiB in size, Autopilot will resize the storage pool when the conditions threshold is crossed.

   apiVersion: apps/v1
   kind: Deployment
   metadata:
     name: pgbench
     labels:
       app: pgbench
   spec:
     selector:
       matchLabels:
         app: pgbench
     strategy:
       rollingUpdate:
         maxSurge: 1
         maxUnavailable: 1
       type: RollingUpdate
     replicas: 1
     template:
       metadata:
         labels:
           app: pgbench
       spec:
         schedulerName: stork
         containers:
           - image: postgres:9.5
             name: postgres
             ports:
             - containerPort: 5432
             env:
             - name: POSTGRES_USER
               value: pgbench
             - name: POSTGRES_PASSWORD
               value: superpostgres
             - name: PGBENCH_PASSWORD
               value: superpostgres
             - name: PGDATA
               value: /var/lib/postgresql/data/pgdata
             volumeMounts:
             - mountPath: /var/lib/postgresql/data
               name: pgbenchdb
           - name: pgbench
             image: portworx/torpedo-pgbench:latest
             imagePullPolicy: "Always"
             env:
               - name: PG_HOST
                 value: 127.0.0.1
               - name: PG_USER
                 value: pgbench
               - name: SIZE
                 value: "300"
             volumeMounts:
             - mountPath: /var/lib/postgresql/data
               name: pgbenchdb
             - mountPath: /pgbench
               name: pgbenchstate
         volumes:
         - name: pgbenchdb
           persistentVolumeClaim:
             claimName: pgbench-data
         - name: pgbenchstate
           persistentVolumeClaim:
             claimName: pgbench-state

AutopilotRule spec

Once you've created your storage and application specs, you can create an AutopilotRule that controls them.

Create a YAML spec for the autopilot rule named autopilotrule-pool-expand-example.yaml and place the following content inside it:

apiVersion: autopilot.libopenstorage.org/v1alpha1
kind: AutopilotRule
metadata:
  name: pool-expand
spec:
  enforcement: required
  ##### conditions are the symptoms to evaluate. All conditions are AND'ed
  conditions:
    expressions:
    # pool available capacity less than 50%
    - key: "100 * ( px_pool_stats_available_bytes/ px_pool_stats_total_bytes)"
      operator: Lt
      values:
        - "50"
    # volume total capacity should not exceed 400GiB
    - key: "px_pool_stats_total_bytes/(1024*1024*1024)"
      operator: Lt
      values:
       - "400"
  ##### action to perform when condition is true
  actions:
    - name: "openstorage.io.action.storagepool/expand"
      params:
        # resize pool by scalepercentage of current size
        scalepercentage: "50"
        # when scaling, resize disks in the pool
        scaletype: "resize-drive"