Skip to main content
Version: 3.1

Adding storage to existing Portworx Cluster Nodes

note

This document presents the non-Kubernetes method of scaling your Portworx cluster. Please refer to the Scale or Restrict page if you are running Portworx on Kubernetes.

Adding Storage to existing Portworx Cluster Nodes

This section illustrates how to add a new node to a Portworx cluster and how to add additional storage to the Portworx Cluster once a new node is added.

Display current cluster status

pxctl status
Status: PX is operational
Node ID: a56a4821-6f17-474d-b2c0-3e2b01cd0bc3
IP: X.X.X.0
Local Storage Pool: 2 pools
Pool IO_Priority Size Used Status Zone Region
0 LOW 200 GiB 1.0 GiB Online default default
1 LOW 120 GiB 1.0 GiB Online default default
Local Storage Devices: 2 devices
Device Path Media Type SizLast-Scan
0:1 /dev/mapper/volume-27dbb728 STORAGE_MEDIUM_SSD 200 GiB 08 Jan 17 16:54 UTC
1:1 /dev/mapper/volume-0a31ef46 STORAGE_MEDIUM_SSD 120 GiB 08 Jan 17 16:54 UTC
total - 320 GiB
Cluster Summary
Cluster ID: bb4bcf13-d394-11e6-afae-0242ac110002
Node IP: X.X.X.197 - Capacity: 2.0 GiB/320 GiB Online (This node)
Node IP: 10.99.119.1 - Capacity: 1.2 GiB/100 GiB Online
Node IP: 10.99.117.129 - Capacity: 1.2 GiB/100 GiB Online
Global Storage Pool
Total Used : 4.3 GiB
Total Capacity : 520 GiB

The above cluster has three nodes and 520GiB of total capacity.

Add a new node to cluster

Below is an example of how to run Portworx in a new node so it joins an existing cluster. Note how docker run command is invoked with a cluster token token-bb4bcf4b-d394-11e6-afae-0242ac110002 that has a token- prefix to the cluster ID to which we want to add the new node.

docker run --restart=always --name px-enterprise -d --net=host --privileged=true -v /run/docker/plugins:/run/docker/plugins -v /var/lib/osd:/var/lib/osd:shared -v /dev:/dev -v /etc/pwx:/etc/pwx -v /opt/pwx/bin:/export_bin:shared -v /var/run/docker.sock:/var/run/docker.sock -v /mnt:/mnt:shared -v /var/cores:/var/cores -v /usr/src:/usr/src portworx/px-enterprise -m team0:0 -d team0

Here is how the cluster would look like after a new node is added without any storage:

pxctl status
Status: PX is operational
Node ID: a0b87836-f115-4aa2-adbb-c9d0eb597668
IP: X.X.X.0
Local Storage Pool: 0 pool
Pool IO_Priority Size Used Status Zone Region
No storage pool
Local Storage Devices: 0 device
Device Path Media Type Size Last-Scan
No storage device
total - 0 B
Cluster Summary
Cluster ID: bb4bcf13-d394-11e6-afae-0242ac110002
Node IP: 10.99.119.1 - Capacity: 1.2 GiB/100 GiB Online
Node IP: 10.99.117.129 - Capacity: 1.2 GiB/100 GiB Online
Node IP: X.X.X.197 - Capacity: 2.0 GiB/320 GiB Online
Node IP: X.X.X.185 - Capacity: 0 B/0 B Online (This node)
Global Storage Pool
Total Used : 4.3 GiB
Total Capacity : 520 GiB

Note how the capacity of the cluster has remained unchanged.

Add more storage to the new node

Added another 100G of storage to this node and the device is seen as /dev/dm-1:

multipath -ll
volume-a9e55549 (360014055671ce0d20184a619c27b31d0) dm-1   ,IBLOCK
size=100G features='0' hwhandler='1 alua' wp=rw
`-+- policy='round-robin 0' prio=1 status=active
|- 2:0:0:0 sdb 8:16 active ready running
`- 3:0:0:0 sdc 8:32 active ready running

Add the new drive to cluster to increase the storage

pxctl service drive add --drive /dev/dm-1 --operation start
Adding device  /dev/dm-1 ...
"Drive add done: Storage rebalance is in progress"

Rebalance the storage pool

note

Pool rebalance is a must. It spreads data across all available drives in the pool.

Check the rebalance status and wait for completion:

pxctl service drive add --drive /dev/dm-1 --operation status
"Drive add: Storage rebalance running: 1 out of about 9 chunks balanced (2 considered),  89% left"
pxctl service drive add --drive /dev/dm-1 --operation status
"Drive add: Storage rebalance complete"

In case drive add operation did not start a rebalance, start it manually. For e.g., if the drive was added to pool 0:

pxctl service drive rebalance --poolID 0 --operation start
Done: "Pool 0: Balance is running"

Check the rebalance status and wait for completion:

pxctl service drive rebalance --poolID 0 --operation status
Done: "Pool 0: Balance is not running"

Check cluster status

As seen below, the 100G of additional capacity is available with total capacity of the cluster going to 620GB

pxctl status
Status: PX is operational
Node ID: a0b87836-f115-4aa2-adbb-c9d0eb597668
IP: X.X.X.0
Local Storage Pool: 1 pool
Pool IO_Priority Size Used Status Zone Region
0 LOW 100 GiB 1.0 GiB Online default default
Local Storage Devices: 1 device
Device Path Media Type Size Last-Scan
0:1 /dev/mapper/volume-a9e55549 STORAGE_MEDIUM_SSD 100 GiB08 Jan 17 21:46 UTC
total - 100 GiB
Cluster Summary
Cluster ID: bb4bcf13-d394-11e6-afae-0242ac110002
Node IP: 10.99.119.1 - Capacity: 1.2 GiB/100 GiB Online
Node IP: X.X.X.197 - Capacity: 2.0 GiB/320 GiB Online
Node IP: X.X.X.185 - Capacity: 0 B/100 GiB Online (This node)
Node IP: 10.99.117.129 - Capacity: 1.2 GiB/100 GiB Online
Global Storage Pool
Total Used : 4.3 GiB
Total Capacity : 620 GiB
Was this page helpful?