Skip to main content
Version: 3.2

Stateful application storage operations in OCP IBM Cloud

With Portworx, you can backup stateful applications and their volumes to an external object store and restore to the same cluster or to a new cluster. When it comes to timing, you can perform backup operations manually whenever you wish, or you can schedule them with a schedulePolicy. You can even use Portworx's backup functionality to clone applications between namespaces by restoring to a different namespace in the same cluster.

Prerequisites​

All application storage operations require the following prerequisites:

  • Administrator-level cluster privileges if you operate between namespaces

Configure Application Backups​

Configure application backups by creating and applying the following CRDs:

  • backupLocation
  • applicationBackup

Create a backupLocation CRD​

Use the backupLocation CRD to specify the configuration information for your S3-compliant object store.

The example in this document uses an S3 bucket to store application backup data. To create backupLocations using other object stores, see the Stateful application CRD reference section of the documentation.

"endpoint" : "bucketEndpoint.com"
"key": "ABCDEF1234567890"
"secret": "ABCDEF1234567890ABCDEF1234567890ABCDEF1234567890"

  • If you're restoring backups to a different cluster from the one you took your backups from, you must create a backupLocation CRD on your new cluster that matches the backupLocation CRD on your original cluster.

  • If you want to use S3 Object Lock, refer to S3 Object Lock in PX-Backup.

You can specify your object store credentials directly in the BackupLocation configuration as plaintext or use a Kubernetes secret:

Plaintext credentials​

  1. Create a backupLocation YAML file, specifying the following:

    • name: the backupLocation object's name
    • namespace: the namespace the backupLocation exists in
    • location:
      • type: the object store type
      • path: the bucket Portworx will use for the backup
      • sync: If you're restoring to a new cluster, set sync to true to allow your new cluster to retrieve the previous backups from your backup location.
      • s3Config:

        • region: which region your s3 bucket is located in

        • accessKeyID: your bucket's accessKeyID

        • secretAccessKey: your bucket's secretAccessKey

        • endpoint: the URL or IP address of your bucket

        • disableSSL: whether or not to disable SSL

          apiVersion: stork.libopenstorage.org/v1alpha1
          kind: BackupLocation
          metadata:
            name: mysql
            namespace: mysql-app
            annotations:
              stork.libopenstorage.org/skipresource: "true"
          location:
            type: s3
            path: "bucket-name"
            sync: true
            s3Config:
              region: us-east-1
              accessKeyID: XXXX
              secretAccessKey: XXXX
              endpoint: "https://bucketEndpoint.com"
              disableSSL: false
note

If you use URL as your bucket endpoint, you must include the http prefix: either https:// or http://, depending on whether or not you're using SSL.

  1. Apply the YAML:

    oc apply -f backLo.yaml

Kubernetes secret containing your credentials​

  1. Create a Kubernetes Secret YAML file, specifying the following:
  • name: the Secret object's name
  • namespace: the namespace the Secret exists in
  • stringData:

    • region: which region your s3 bucket is located in

    • accessKeyID: your bucket's accessKeyID

    • secretAccessKey: your bucket's secretAccessKey

    • endpoint: the URL or IP address of your bucket

    • disableSSL: whether or not to disable SSL

    • encryptionKey: your secret's encryption key

        apiVersion: v1
        kind: Secret
        metadata:
          name: s3secret
          namespace: mysql
          annotations:
            stork.libopenstorage.org/skipresource: "true"
        stringData:
          region: us-east-1
          accessKeyID: <access-key>
          secretAccessKey: <secret-key>
          endpoint: "X.X.X.141:9010"
          disableSSL: "false"
          encryptionKey: "testKey"

  1. Apply the Secret's YAML file:

    oc apply -f s3secret.yaml

  2. Create a backupLocation YAML file, specifying the following:

  • name: the backupLocation object's name
  • namespace: the namespace the backupLocation exists in
  • location:

    • type: the object store type

    • path: the bucket Portworx will use for the backup

    • secretConfig: the Secret object containing your bucket's credentials

    • sync: If you're restoring to a new cluster, set sync to true to allow your new cluster to retrieve the previous backups from your backup location.

      apiVersion: stork.libopenstorage.org/v1alpha1
      kind: BackupLocation
      metadata:
        name: mysql-backup
        namespace: mysql
        annotations:
          stork.libopenstorage.org/skipresource: "true"
      location:
        type: s3
        path: "bucket-name"
        secretConfig: s3secret
        sync: true
note

If you use URL as your bucket endpoint, you must include the http prefix: either https:// or http://, depending on whether or not you're using SSL.

  1. Apply the YAML:

    oc apply -f backLo.yaml

Create an applicationBackup CRD​

Use the applicationBackup CRD to specify what namespaces have their applications backed-up.

  1. Create an applicationbackup YAML file, specifying the following:

  • name: the applicationBackup object's name

  • namespace: the namespace the applicationBackup exists in

  • spec:

    • backupLocation: what backupLocation object to use to determine where to send the backup
    • namespaces: the namespaces to backup
    • reclaimPolicy: what happens to objects in the object store when the ApplicationBackup object is deleted, either Delete or Retain
    • selectors: define specific labels to determine which objects and volumes are backed-up
    • preExecRule: what rule to run before performing backup
    • postExecRule: what rule to run after performing backup
    apiVersion: stork.libopenstorage.org/v1alpha1
    kind: ApplicationBackup
    metadata:
      name: backup
      namespace: mysql-app
    spec:
      backupLocation: mysql
      namespaces:
      - mysql-app
      reclaimPolicy: Delete
      selectors:
      preExecRule:
      postExecRule:

  1. Apply the YAML:

    oc apply -f appBack.yaml

  2. Verify the applicationBackup object's status with the storkctl get command. You can see what stage the backup is in, as well as its status:

    storkctl get applicationbackup -n mysql-app
    NAME      STAGE     STATUS    VOLUMES   RESOURCES   CREATED               ELAPSED
    backup    Volumes   Pending   0/0       0           11 Sep 19 22:10 UTC   19.023065649s

    You can also describe the object to get more information about the backup. This is useful for troubleshooting:

    oc describe applicationbackup.stork.libopenstorage.org -n mysql-app

    The following error message displays when your credentials are invalid.

    Warning  Failed  7s  stork  Error starting ApplicationBackup for volumes: rpc error: code = Internal desc = Failed to create backup: Failed to validate credentials: error validating credential: AccessDenied: Access Denied.
             status code: 403, request id: 15C38376E0A0EA7F, host id:

Create an ApplicationBackupSchedule CRD​

The ApplicationBackupSchedule CRD associates a SchedulePolicy with an application backup operation, allowing you to schedule when and how application backups are performed.

  1. Create a file named backupSchedulePolicy.yaml with the following content:

    apiVersion: stork.libopenstorage.org/v1alpha1
    kind: SchedulePolicy
    metadata:
      name: backupSchedule
    policy:
      interval:
        intervalMinutes: 60
        retain: 5
      daily:
        time: "10:14PM"
        retain: 5
      weekly:
        day: "Thursday"
        time: "10:13PM"
        retain: 5
      monthly:
        date: 14
        time: "8:05PM"
        retain: 5

    For details about how you can configure a schedule policy, see the SchedulePolicy page.

  2. Apply the spec by entering the following command:

    oc apply -f backupSchedulePolicy.yaml

  3. Display your schedule policy. Enter the storkctl get command passing it the name of your policy:

    storkctl get schedulepolicy
    NAME           INTERVAL-MINUTES   DAILY     WEEKLY             MONTHLY
    testpolicy     60                 10:14PM   Thursday@10:13PM   14@8:05PM

  4. Create an ApplicationBackupSchedule YAML file, specifying the following:

  • name: the applicationBackupSchedule object's name

  • namespace: the namespace the applicationBackupSchedule exists in

  • spec.schedulePolicyName: the name of the schedule policy that defines when backup actions happen

  • spec.template.spec.backupLocation: the name of the backup location spec

  • spec.template.spec.namespaces: namespaces which will be backed up

  • spec.template.spec.reclaimPolicy: what happens to objects in the object store when the ApplicationBackup object is deleted

    apiVersion: stork.libopenstorage.org/v1alpha1
    kind: ApplicationBackupSchedule
    metadata:
      name: backup
      namespace: mysql
    spec:
      schedulePolicyName: testpolicy
      template:
        spec:
          backupLocation: mysql
          namespaces:
          - mysql
          reclaimPolicy: Delete

Restore an application​

You can restore an application by applying an ApplicationRestore object.

  1. On OpenShift, for restoring an application across namespaces, you must modify your destination namespace to include the same supplemental group annotation values as your source namespace:

    annotations:
      openshift.io/sa.scc.mcs: s0:c26,c25
      openshift.io/sa.scc.supplemental-groups: 1001990000/10000
      openshift.io/sa.scc.uid-range: 1001990000/10000

  2. Create an ApplicationRestore YAML file, specifying the following:

    • name: the ApplicationRestore object's name
    • namespace: the ApplicationRestore object's namespace
    • spec.backupName: the name of the applicationBackup object to restore from
    • spec.backupLocation: which backup location object to get application backups from
    • spec.namespaceMapping: a map of source and destination namespaces, allowing you to restore a backup to a different namespace
    • spec.replacePolicy: specifies whether you want to delete or retain any matching existing resource in the target namespace
    apiVersion: stork.libopenstorage.org/v1alpha1
    kind: ApplicationRestore
    metadata:
      name: restore
      namespace: mysql-app
    spec:
      backupName: backup
      backupLocation: mysql
      namespaceMapping:
        <backup_namespace>: <restore_namespace>
      replacePolicy: Delete
    note

    You can run the storkctl get applicationbackup -n namespace command to help you see which backup to restore from.

  3. Apply the YAML:

    oc apply -f appRestore.yaml

    The moment you apply the YAML, the application begins to restore. Monitor the status with the storkctl get command:

    storkctl get applicationrestore -n mysql-app
    NAME      STAGE     STATUS       VOLUMES   RESOURCES   CREATED               ELAPSED
    restore   Final     Successful   1/1       3           11 Sep 19 23:32 UTC   35s

    Verify its status with the oc get pods command:

    oc get pods -n mysql-app
    NAME                     READY   STATUS    RESTARTS   AGE
    mysql-6d69b99774-2bv4m   0/1     Pending   0          3s

Clone an Application​

You can clone an application to a different namespace. You must create the ApplicationClone object in the admin namespace, which is kube-system by default.

  1. If you're cloning an application across namespaces, you must modify your destination namespace to include the same supplemental group annotation values as your source namespace:

    annotations:
      openshift.io/sa.scc.mcs: s0:c26,c25
      openshift.io/sa.scc.supplemental-groups: 1001990000/10000
      openshift.io/sa.scc.uid-range: 1001990000/10000

    Distributed apps, such as Cassandra, may use the same node IDs on the destination namespace as their source, causing disruption when the new nodes join the source cluster.

  2. Create a an ApplicationClone YAML file, specifying the following:

    • name: the ApplicationClone object's name

    • namespace: the ApplicationClone object's namespace

    • spec.sourceNamespace: the namespace you want to clone applications from

    • spec.destinationNamespace: the namespace you want to clone applications to

      apiVersion: stork.libopenstorage.org/v1alpha1
      kind: ApplicationClone
      metadata:
        name: clone-mysql
        namespace: kube-system
      spec:
        sourceNamespace: mysql-app
        destinationNamespace: clone-mysql

  3. Apply the YAML file:

    oc apply -f appClone.yaml
Last updated on