Version: 3.2

Import data into Portworx PVCs for AWS EKS

In modern Kubernetes-based infrastructure, data migration and application deployment are critical tasks. This document provides a step-by-step guide on how to import an application data from a PVC backed by a non Portworx storage driver onto PVCs created by Portworx.

To import data into a Portworx PVC, Stork will use rsync to copy the data from an existing PVC into a PVC backed by Portworx. Stork will run a Kubernetes Job which runs the rsync command inside a container. This can be useful if you’re a new onboarding customer who was previously using a different storage provider, and who now needs to import data from non-Portworx PVCs into Portworx PVCs.

Prerequisites

A Kubernetes cluster set up
Portworx deployed on this cluster with Stork version 23.8.0 or higher

Import an application and its data onto PVCs

Define a StorageClass and PVC to set up Portworx storage.

Create a Portworx PVC using the px-csi-db StorageClass. This StorageClass would be already created for you when you installed Portworx. This is the PVC into which you will be importing data into.

kubectl create -f destination-pvc.yaml

destination-pvc.yaml

kind: PersistentVolumeClaim
apiVersion: v1
metadata:
  name: postgres-data
  labels:
    app: postgres
spec:
  storageClassName: px-csi-db
  accessModes:
    - ReadWriteOnce
  resources:
    requests:
      storage: 5Gi

Scale down the application replicas to 0 to avoid data conflicts during migration.

Stork supports importing only offline data import. Scaling down the application using the non Portworx PVC ensures the data stays consistent as we import it into a Portworx PVC.
```
kubectl scale --replicas=0 <deployment>/<your-application-name>
```
Replace <deployment>/<your-application-name> in the above command with the appropriate resource.

Create a DataExport object specifying the source and destination of the data import.

The DataExport CR is the main driver for triggering the import between a non Portworx PVC (source) and the Portworx PVC (destination). Both these PVCs are provided in the DataExport CR specification.

kubectl create -f dataexport.yaml

dataexport.yaml

apiVersion: kdmp.portworx.com/v1alpha1
kind: DataExport
metadata:
  name: postgres-export
  namespace: default
spec:
  type: rsync
  source:
    apiVersion: v1
    kind: PersistentVolumeClaim
    name: pgbench-data
    namespace: default
  destination:
    apiVersion: v1
    kind: PersistentVolumeClaim
    name: postgres-data
    namespace: default

Monitor the progress of the data export using kubectl describe.

Following are the sample outputs for a data export process:

In progress

Spec:
  Destination:
    API Version:  v1
    Kind:         PersistentVolumeClaim
    Name:         postgres-data
    Namespace:    default
  Source:
    API Version:  v1
    Kind:         PersistentVolumeClaim
    Name:         pgbench-data
    Namespace:    default
  Type:           rsync
Status:
  Reason:
  Stage:        TransferInProgress
  Status:       InProgress
  Transfer ID:  default/import-rsync-pgbench-data
Events:         <none>

Completed

Spec:
Destination:
  API Version:  v1
  Kind:         PersistentVolumeClaim
  Name:         postgres-data
  Namespace:    default
Source:
  API Version:  v1
  Kind:         PersistentVolumeClaim
  Name:         pgbench-data
  Namespace:    default
Type:           rsync
Status:
  Progress Percentage:  100
  Stage:                Final
  Status:               Successful
  Transfer ID:          default/import-rsync-pgbench-data
Events:

Update the application's deployment configuration to use the Portworx PVC.

This section uses kubectl edit to modify your existing application to use the newly created Portworx PVC into which data has been imported. Based on your deployment model, you will need to change the application specifications to use the new Portworx PVC.
```
kubectl edit <deployment> <your-application-namespace>
```
Restore the application to its desired replica count:
```
kubectl scale --replicas=1 <deployment>/<your-application-name>
```
Replace <deployment>/<your-application-name> in steps 6 and 7 with the appropriate resource.

Additional options

This section provides options for customization, such as specifying a custom Docker registry, using image pull secrets, and tweaking rsync flags. You should provide these options to Stork through environment variables, which you can configure in the StorageCluster specification.

When using custom docker registry

In cases where a custom Docker registry is employed, Stork needs to use such a registry while initiating the job which runs the rsync process. To customize the rsync image name, you can update the following environment variable in the StorageCluster specification:

stork:
  enabled: true
  env:
  - name: KDMP_RSYNC_IMAGE
    value: <custom-registry>/eeacms/rsync:<tag>

This allows you to specify a unique image location from your custom Docker registry.

When using Image Pull Secrets

The rsync operation runs inside the container eeacms/rsync. If you require the use of Image Pull Secrets to pull this image, you can provide the Kubernetes secret name as an environment variable. You should establish these image pull secrets within the same namespaces where Stork is deployed. You can manage this configuration as an environment variable in the StorageCluster specification, which you defined during Step 1 of the Import an application and its data onto PVCs section above.

stork:
  enabled: true
  env:
  - name: KDMP_RSYNC_IMAGE_SECRET
    value: <image-secret-name>

This allows for secure retrieval of the rsync image using the specified image pull secret.

Customizing the rsync flags

Customizing the rsync flags is possible, as the default configuration employs the following flags for the rsync command within the rsync job pod: -avz. To specify your own set of rsync flags, you can introduce an environment variable in the StorageCluster specification as follows:

stork:
  enabled: true
  env:
  - name: KDMP_RSYNC_FLAGS
    value: "-<custom-flags>"

Ensure to include a hyphen at the beginning of your custom flags within the specified value field. This enables you to fine-tune the rsync operation according to your specific requirements.

Supported environment variables

You should provide all the following environment variables within the env section for Stork in the StorageCluster specification:

Environment variable	Description
`KDMP_RSYNC_IMAGE`	Custom image name for the rsync pod deployed by Stork’s KDMP controller
`KDMP_RSYNC_IMAGE_SECRET`	Image pull secret for the rsync pod deployed by Stork’s KDMP controller
`KDMP_RSYNC_OPENSHIFT_SCC`	Openshift SCC to be used with the rsync pod deployed by Stork’s KDMP controller
`KDMP_RSYNC_FLAGS`	Custom rsync flags that will be used by the rsync command that runs inside the rsync pod deployed by Stork’s KDMP controller
`KDMP_RSYNC_REQUEST_CPU`	Request CPU for the rsync pod deployed by Stork’s KDMP controller
`KDMP_RSYNC_REQUEST_MEMORY`	Request Memory for the rsync pod deployed by Stork’s KDMP controller
`KDMP_RSYNC_LIMIT_CPU`	CPU Limit for the rsync pod deployed by Stork’s KDMP controller
`KDMP_RSYNC_LIMIT_MEMORY`	Memory Limit for the rsync pod deployed by Stork’s KDMP controller

Prerequisites​

Import an application and its data onto PVCs​

Additional options​

When using custom docker registry​

When using Image Pull Secrets​

Customizing the rsync flags​

Supported environment variables​