Skip to main content
Version: 3.1

Migrate with Stork in ROSA

This document will guide you through the process of migrating your Portworx volumes one time between clusters using Stork. If you wish to set up disaster recovery, refer to the Disaster Recovery section.

Prerequisites​

  • Secret Store: A secret store is configured on both clusters. This will store the credentials for the objectstore.
  • Objectstore: An AWS S3 compatible, AWS S3
  • Network Connectivity:
    • OpenShift4+: Open ports in the range of 17001-17020 must be accessible to reach Portworx API endpoints. To know more about the specific ports for your environment, see the Network table on the Prerequisites page.
  • Default StorageClass: At most one StorageClass object is configured as the default. Having multiple default StorageClasses will cause PVC migrations to fail.
  • Cloud Environment: Ensure that you have successfully applied the instructions provided on the EKS page for setting up your destination cluster.
  • storkctl is installed on both clusters. Note that always use the latest storkctl binary tool by downloading it from the current running Stork container.
note

The default admin namespace is kube-system. In all examples, <migrationnamespace> is considered the admin namespace responsible for migrating all namespaces from your source cluster to the destination cluster. Alternatively, you can specify a non-admin namespace, in such a case, only that specific namespace will be migrated. To learn how to set up an admin namespace, refer to the Set up a Cluster Admin namespace for Migration page.

Create a ClusterPair object​

For migration with Stork, it is essential to pair two clusters to enable the migration of data and resources. To facilitate this process, you need to create a trust object, known as ClusterPair object, on the source cluster. Portworx requires this object to establish a communication channel between the two clusters.

The ClusterPair object pairs the two clusters, allowing migration of resources and volumes.

Pair your clusters​

Use the storkctl create clusterpair command to create your unidirectional ClusterPair using the command options specific to your environment, as explained in the following sections. The unidirectional ClusterPair will establish authentication from the source cluster to the destination cluster so resources and data can be migrated in one direction.​​

This command creates Clusterpair object on the source cluster using the source config file (<source-kubeconfig-cluster>) and the destination kubeconfig file (<destination-kubeconfig-cluster>) in the specified namespace (<migrationnamespace>). This object establishes and authenticates the connection between the two clusters for migrating resources and volumes within the specified namespace.

note

If you configured the portworx-api service to be accessible externally through ingresses or routes, specify the following two additional command options while creating the ClusterPair:

  • --dest-ep string: Endpoint of the portworx-api service in the destination cluster.
  • --src-ep string: Endpoint of the portworx-api service in the source cluster.

If the above endpoints are not specified, the storage status of the ClusterPair will show as failed.

Create a unidirectional ClusterPair​

Depending upon your ObjectStore, click the appropriate tab to run the command to create a unidirectional ClusterPair named migration-cluster-pair for cluster migration:

Run the following command to create a unidirectional ClusterPair named migration-cluster-pair for cluster migration:

storkctl create clusterpair migration-cluster-pair \
--namespace <migrationnamespace> \
--dest-kube-file <destination-kubeconfig-file> \
--src-kube-file <source-kubeconfig-file> \
--provider s3 \
--s3-endpoint s3.amazonaws.com \
--s3-access-key <s3-access-key> \
--s3-secret-key <s3-secret-key> \
--s3-region <s3-region> \
--mode migration \
--unidirectional

Portworx will use AWS S3 or S3 compatible blob storage for migrating volume data between the two clusters. The credentials specified in the above command are used for authenticating with the your cloud platform. The S3 bucket information is provided with the specified access key, secret key, and region (<s3-bucket-location>) to facilitate the data transfer between the two clusters.

​

Verify the status of your unidirectional ClusterPair​

​ The following command uses storkctl to retrieve information about the cluster pairs in the Kubernetes namespace <migrationnamespace>: ​

storkctl get clusterpair -n <migrationnamespace>

​ This command displays details such as the name and status of the existing cluster pairs within that specific namespace.

Source cluster details:

NAME                     STORAGE-STATUS  SCHEDULER-STATUS  CREATED
migration-cluster-pair   Ready           Ready             10 Mar 23 17:16 PST

​On a successful pairing, you should see the STORAGE-STATUS and SCHEDULER-STATUS as Ready.

Encountered an error?
If you see an error, you can get more information by running the following command:

oc describe clusterpair <your-clusterpair-name> -n <migrationnamespace>

Use Rancher Projects with ClusterPair​

Follow the instructions on the Use Rancher Projects with ClusterPair page if you are using Rancher projects, otherwise skip to the next section.

Start your migration​

Once the pairing is configured, applications can be migrated repeatedly to the destination cluster.

Perform the following steps to migrate your cluster resources and volumes.

Define your migration object​

Paste the following spec into the migration.yaml file to define your migration object:

apiVersion: stork.libopenstorage.org/v1alpha1
kind: Migration
metadata:
  name: <your-migration-object-name>
  namespace: <migrationnamespace>
spec:
  clusterPair: migration-cluster-pair
  includeResources: true
  startApplications: true
  namespaces:
  - <app-namespace1>
  - <app-namespace2>
  purgeDeletedResources: false

Where:

  • apiVersion: is set as stork.libopenstorage.org/v1alpha1
  • kind: is set as Migration
  • metadata.name: is the name of the object that performs the migration
  • metadata.namespace: is the name of the namespace in which you want to create the object
  • spec.clusterPair: is the name of the ClusterPair object created in the Pair your clusters section
  • spec.includeResources: is a boolean value specifying if the migration should include PVCs and other application specs. If you set this field to false, Portworx will only migrate your volumes.
  • spec.startApplications: with a boolean value specifying if Portworx should automatically start applications on the destination cluster. If you set this field to false, then the Deployment and StatefulSet objects on the destination cluster will be set to zero. Note that, on the destination cluster, Portworx uses the stork.openstorage.org/migrationReplicas annotation to store the number of replicas from the source cluster.
  • spec.namespaces: is the list of namespaces you want to migrate
  • spec.purgeDeletedResources: with a boolean value specifying if Stork should automatically purge a resource from the destination cluster when you delete it from the source cluster. The default value is false.

(Optional) Customize your migration​

You can define pre and post executable rules for your migration and specify them in your migration object spec to customize your migration. The pre-executable rule will run before the migration is triggered, and the post-executable rule will run after the migration has been triggered.

When you are using an admin namespace to migrate multiple namespaces and want to customize your migration using the pre or post executable rules, create these rules in the admin namespace.

The following example shows how you can specify the pre and post rules in your migration object:

apiVersion: stork.libopenstorage.org/v1alpha1
kind: Migration
metadata:
  name: <your-migration-object-name>
  namespace: <migrationnamespace>
spec:
  clusterPair: migration-cluster-pair
  includeResources: true
  startApplications: true
  preExecRule: <your-pre-rule>
  postExecRule: <your-post-rule>
  namespaces:
  - <app-namespace1>
  - <app-namespace2>
  purgeDeletedResources: false

If the rules do not exist, you will see an event and the migration will stop.

  • If the PreExec rule fails for any reason, it will log an event against the object and retry. The Migration will not be marked as failed.

  • If the PostExec rule fails for any reason, it will log an event and mark the Migration as failed. It will also try to cancel the migration that was started from the underlying storage driver.

Apply the spec​

Apply the spec to start the migration process:

oc apply -f migration.yaml

Monitoring a migration​

Once the migration has been started using the previous commands, you can check the status using storkctl:

storkctl get migration -n <migrationnamespace>

Here is an example output that you will see initially when the migration is triggered:

NAME                                            CLUSTERPAIR              STAGE     STATUS       VOLUMES   RESOURCES   CREATED
<your-migration-object-name>-2022-12-12-200210  migration-cluster-pair   Volumes   InProgress   0/3       0/0         12 Dec 22 11:45 PST

If the migration is successful, the STAGE will change from Volumes to Application to Final.

Here is an example output of a successful migration:

NAME                                             CLUSTERPAIR            STAGE   STATUS       VOLUMES   RESOURCES   CREATED               ELAPSED
<your-migration-object-name>-2022-12-12-200210   migration-cluster-pair Final   Successful   3/3       10/10       12 Dec 22 12:02 PST   1m23s
Need to see more details?
If you see an error, or you want to see more details of your migration, run the following command:

kubectl describe clusterpair <your-clusterpair-name> -n <migrationnamespace>
Last updated on