Skip to main content
Version: 3.2

Install Portworx on vSphere with Amazon EKS Anywhere

Portworx can be installed on a Kubernetes cluster running on vSphere and managed by Amazon EKS Anywhere.

Note on production use

Portworx on vSphere with Amazon EKS Anywhere is currently undergoing requalification. If you’re interested in deploying on this environment for production workloads, please contact your Pure Storage representative or support.

Prerequisites​

Before you install Portworx on vSphere, ensure that you meet the following prerequisites:

EnvironmentResources
Install

Note: Default Bottlerocket base image is not supported.		Ubuntu 20.04.4 LTS
Ubuntu 18.04.6 LTS
Deployment Host

Note: The same vSphere host where you deploy EKS-Anywhere.		VM OS: Linux
vCPU: 4
Memory: 16 GB
Disk storage: 200 GB
Control-Plane VMsMinimum: 1
Recommended: 3
vCPUs: 2
RAM: 8 GB
OS Volume: 25 GB
Worker Node VMsMinimum: 3 (for storage cluster)
vCPUs: 8
RAM: 16 GB
OS Volume: 25 GB

Step 1: vCenter user for Portworx​

Provide Portworx with a vCenter server user that has either the full admin role, or for increased security, a custom-created role with the following minimum vSphere privileges:

  • Datastore
    • Allocate space
    • Browse datastore
    • Low level file operations
    • Remove file
  • Host
    • Local operations
    • Reconfigure virtual machine
  • Virtual machine
    • Change Configuration
    • Add existing disk
    • Add new disk
    • Add or remove device
    • Advanced configuration
    • Change Settings
    • Extend virtual disk
    • Modify device settings
    • Remove disk

If you created a custom role with the permissions above, select Propagate to children when assigning the user to the role.

note

All commands in the subsequent steps need to be run on a machine with kubectl access.

Step 2: Create a Kubernetes secret with your vCenter user and password​

  1. Get VCenter user and password by running the following commands:

    • For VSPHERE_USER: echo '<vcenter-server-user>' | base64
    • For VSPHERE_PASSWORD: echo '<vcenter-server-password>' | base64

Note the output of both commands for use in the next step.

  1. Update the following Kubernetes Secret template by using the values obtained in step 1 for VSPHERE_USER and VSPHERE_PASSWORD.

    apiVersion: v1
    kind: Secret
    metadata:
      name: px-vsphere-secret
      namespace: <px-namespace>
    type: Opaque
    data:
      VSPHERE_USER: XXXX
      VSPHERE_PASSWORD: XXXX

  2. Apply the above spec to update the spec with your VCenter username and password:

    kubectl apply -f <updated-secret-template.yaml>

Step 3: Generate Portworx spec​

  1. Navigate to Portworx Central and log in, or create an account.

  2. Select Portworx Enterprise and click Continue.

  3. On the Basic page, ensure that Use the Portworx Operator is selected. Select the latest version of Portworx from the Portworx Version drop-down, the Built-in option for etcd, and then click Next.

  4. On the Storage page, select Cloud as your environment, and vSphere as your cloud platform. Select the Create Using a Spec option to configure your storage devices, specify the following, and click Next:

    • In the vCenter Endpoint field, specify the hostname or IP address of your vCenter server.
    • In the vCenter datastore prefix field, specify the prefix name of the vCenter datastore you want to use.
    • In the Kubernetes Secret Name field, specify the name of the secret that you specified in Step 2, which is px-vsphere-secret.
    • In the vCenter Port field, enter port 443, if it is not auto filled.

  5. Choose your network and click Next.

  6. On the Customize page, enable Stork, CSI, Monitoring, and Telemetry in Advanced Settings and click Finish to generate the spec.

Apply specs​

Apply the Operator and StorageCluster specs you generated in the section above using the kubectl apply command:

  1. Deploy the Operator:

    kubectl apply -f 'https://install.portworx.com/<version-number>?comp=pxoperator'
    serviceaccount/portworx-operator created
    podsecuritypolicy.policy/px-operator created
    clusterrole.rbac.authorization.k8s.io/portworx-operator created
    clusterrolebinding.rbac.authorization.k8s.io/portworx-operator created
    deployment.apps/portworx-operator created

  2. Deploy the StorageCluster:

    kubectl apply -f 'https://install.portworx.com/<version-number>?operator=true&mc=false&kbver=&b=true&kd=type%3Dgp2%2Csize%3D150&s=%22type%3Dgp2%2Csize%3D150%22&c=px-cluster-XXXX-XXXX&eks=true&stork=true&csi=true&mon=true&tel=false&st=k8s&e==AWS_ACCESS_KEY_ID%3XXXX%2CAWS_SECRET_ACCESS_KEY%3XXXX&promop=true'
    storagecluster.core.libopenstorage.org/px-cluster-xxxxxxxx-xxxx-xxxx-xxxx-8dfd338e915b created
Monitor the Portworx pods​

  1. Enter the following kubectl get command, waiting until all Portworx pods show as ready in the output:

    kubectl get pods -o wide -n <px-namespace> -l name=portworx

  2. Enter the following kubectl describe command with the ID of one of your Portworx pods to show the current installation status for individual nodes:

    kubectl -n <px-namespace> describe pods <portworx-pod-id>
    Events:
      Type     Reason                             Age                     From                  Message
      ----     ------                             ----                    ----                  -------
      Normal   Scheduled                          7m57s                   default-scheduler     Successfully assigned <px-namespace>/portworx-qxtw4 to k8s-node-2
      Normal   Pulling                            7m55s                   kubelet, k8s-node-2   Pulling image "portworx/oci-monitor:2.5.0"
      Normal   Pulled                             7m54s                   kubelet, k8s-node-2   Successfully pulled image "portworx/oci-monitor:2.5.0"
      Normal   Created                            7m53s                   kubelet, k8s-node-2   Created container portworx
      Normal   Started                            7m51s                   kubelet, k8s-node-2   Started container portworx
      Normal   PortworxMonitorImagePullInPrgress  7m48s                   portworx, k8s-node-2  Portworx image portworx/px-enterprise:2.5.0 pull and extraction in progress
      Warning  NodeStateChange                    5m26s                   portworx, k8s-node-2  Node is not in quorum. Waiting to connect to peer nodes on port 9002.
      Warning  Unhealthy                          5m15s (x15 over 7m35s)  kubelet, k8s-node-2   Readiness probe failed: HTTP probe failed with statuscode: 503
      Normal   NodeStartSuccess                   5m7s                    portworx, k8s-node-2  PX is ready on this node
note

In your output, the image pulled will differ based on your chosen Portworx license type and version.

Monitor the cluster status​

Use the pxctl status command to display the status of your Portworx cluster:

PX_POD=$(kubectl get pods -l name=portworx -n <px-namespace> -o jsonpath='{.items[0].metadata.name}')
kubectl exec $PX_POD -n <px-namespace> -- /opt/pwx/bin/pxctl status
Last updated on
Was this page helpful?