Skip to main content
Version: 3.1

ActiveMQ with Portworx on Kubernetes

ActiveMQ is an open-source message broker written in Java. It plays a central role in many distributed systems that heavily rely on Java technologies. You can configure ActiveMQ to safely pass messages between decoupled systems.

This reference architecture document shows how you can create and run ActiveMQ with Portworx on Kubernetes. This way, Portworx will provide a reliable persistent storage layer which makes sure no messages are lost.

Create a StorageClass

Enter the following combined spec and kubectl command to create and apply a StorageClass with 2 replicas that uses a high io-priority storage pool:

kubectl apply -f - <<'_EOF'
---
apiVersion: storage.k8s.io/v1
kind: StorageClass
metadata:
name: px-activemq
parameters:
io_priority: high
repl: "2"
group: "amq_vg"
provisioner: kubernetes.io/portworx-volume
allowVolumeExpansion: true
reclaimPolicy: Delete
_EOF
...
storageclass.storage.k8s.io/px-activemq created

For details about the Portworx-specific parameters, refer to the Portworx Volume section.

note

If you're using Portworx with CSI, you must set the value of the provisioner parameter to pxd.portworx.com.

Setup ActiveMQ

Configuration

Enter the following combined spec and kubectl command to set-up a ConfigMap that configures how ActiveMQ starts-up:

kubectl apply -f - <<'_EOF'
---
apiVersion: v1
kind: ConfigMap
metadata:
name: active-mq-xml
data:
activemq.xml: |
<?xml version="1.0" encoding="UTF-8"?>
<!--
Licensed to the Apache Software Foundation (ASF) under one or more
contributor license agreements. See the NOTICE file distributed
with this work for additional information regarding copyright ownership.
The ASF licenses this file to You under the Apache License, Version 2.0
(the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed
under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES
OR CONDITIONS OF ANY KIND, either express or implied. See the License for
the specific language governing permissions and limitations under the License.
-->
<beans xmlns="http://www.springframework.org/schema/beans"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans.xsd
http://activemq.apache.org/schema/core http://activemq.apache.org/schema/core/activemq-core.xsd">
<!-- Allows us to use system properties as variables in this configuration file -->
<bean class="org.springframework.beans.factory.config.PropertyPlaceholderConfigurer">
<property name="locations">
<value>file:${activemq.conf}/credentials.properties</value>
</property>
</bean>
<!-- Allows accessing the server log -->
<bean id="logQuery" class="io.fabric8.insight.log.log4j.Log4jLogQuery" lazy-init="false" scope="singleton" init-method="start" destroy-method="stop" />
<!--
The <broker> element is used to configure the ActiveMQ broker.
-->
<broker xmlns="http://activemq.apache.org/schema/core" brokerName="${HOSTNAME}" dataDirectory="${activemq.data}">
<!-- ##### DESTINATIONS ##### -->
<destinationPolicy>
<policyMap>
<policyEntries>
<policyEntry queue="&gt;" producerFlowControl="true" memoryLimit="100mb" maxBrowsePageSize="700">
<!--
Allow messages to be replayed back to original broker if there is demand.
(replayWhenNoConsumers="true").
Due to ENTMQ-444 you also want to configure a replayDelay that is high enough so that
any outstanding message acks are passed along the network bridge *before* we start
to replay messages (replayDelay="500"). The value of replayDelay is a bit of a guess but
on a decently fast network 500 msecs should be enough to pass on and process all message acks.

Note: JMS clients that use the failover transport to connect to a broker in the mesh
arbitrarily should consider using an initialReconnectDelay on the failover url that is
higher than replayDelay configured in the broker. E.g.
"failover:(tcp://brokerA:61616,tcp://brokerB:61616)?randomize=true&initialReconnectDelay=700"
This ensures that the demand subscription for this reconnecting consumer is only created
after replayDelay has elapsed.
If its created before, it may lead to the remote broker skipping message dispatch
to the remote broker and those message would seem to be stuck on the broker despite a
consumer being connected via a networked broker.
See ENTMQ-538 for more details.
-->
<networkBridgeFilterFactory>
<conditionalNetworkBridgeFilterFactory replayWhenNoConsumers="true" replayDelay="500" />
</networkBridgeFilterFactory>
</policyEntry>
<policyEntry topic="&gt;" producerFlowControl="true">
<!--
The constantPendingMessageLimitStrategy is used to prevent
slow topic consumers to block producers and affect other consumers
by limiting the number of messages that are retained
For more information, see:

http://activemq.apache.org/slow-consumer-handling.html
-->
<pendingMessageLimitStrategy>
<constantPendingMessageLimitStrategy limit="1000" />
</pendingMessageLimitStrategy>
</policyEntry>
</policyEntries>
</policyMap>
</destinationPolicy>
<!--
The managementContext is used to configure how ActiveMQ is exposed in
JMX. By default, ActiveMQ uses the MBean server that is started by
the JVM. For more information, see:

http://activemq.apache.org/jmx.html
-->
<managementContext>
<managementContext createConnector="false" />
</managementContext>
<ioExceptionHandler>
<defaultIOExceptionHandler ignoreNoSpaceErrors="false" />
</ioExceptionHandler>
<networkConnectors>
<!--
In a full mesh we want messages to travel freely to any broker
(i.e. messageTTL="-1") but create demand subscription only to the next connected
broker (i.e. consumerTTL="1"). See AMQ-4607.
-->
<!-- ##### MESH_CONFIG ##### -->
<networkConnector userName="admin" password="admin" uri="dns://px-amq-tcp:61616/?transportType=tcp&amp;queryInterval=30" messageTTL="-1" consumerTTL="1" />
</networkConnectors>
<!--
Configure message persistence for the broker. The default persistence
mechanism is the KahaDB store (identified by the kahaDB tag).
For more information, see:

http://activemq.apache.org/persistence.html
-->
<persistenceAdapter>
<kahaDB enableJournalDiskSyncs="false" directory="${activemq.data}/kahadb" />
</persistenceAdapter>
<plugins>
<jaasAuthenticationPlugin configuration="activemq" />
</plugins>
<!--
The systemUsage controls the maximum amount of space the broker will
use before disabling caching and/or slowing down producers.
For more information, see:

http://activemq.apache.org/producer-flow-control.html
-->
<systemUsage>
<systemUsage>
<memoryUsage>
<memoryUsage percentOfJvmHeap="70" />
</memoryUsage>
<storeUsage>
<storeUsage limit="50 gb" />
</storeUsage>
<tempUsage>
<tempUsage limit="50 gb" />
</tempUsage>
</systemUsage>
</systemUsage>
<!--
The transport connectors expose ActiveMQ over a given protocol to
clients and other brokers. For more information, see:

http://activemq.apache.org/configuring-transports.html
-->
<!-- ##### TRANSPORT_CONNECTORS ##### -->
<transportConnectors>
<transportConnector name="openwire" uri="tcp://0.0.0.0:61616?maximumConnections=1000&amp;wireFormat.maxFrameSize=104857600" />
</transportConnectors>
<!-- ##### SSL_CONTEXT ##### -->
<!-- destroy the spring context on shutdown to stop jetty -->
<shutdownHooks>
<bean xmlns="http://www.springframework.org/schema/beans" class="org.apache.activemq.hooks.SpringContextHook" />
</shutdownHooks>
</broker>
<!--
Enable web consoles, REST and Ajax APIs and demos
The web consoles requires by default login, you can disable this in the jetty.xml file

Take a look at ${ACTIVEMQ_HOME}/conf/jetty.xml for more details
-->
<!-- Do not expose the console or other webapps
<import resource="jetty.xml" />
-->
</beans>
_EOF
...
configmap/active-mq-xml created

Defining claim for persistent volume

Enter the following combined kubectl command and spec to define the request to generate a Portworx-powered persistent volume:

kubectl apply -f - <<'_EOF'
---
apiVersion: v1
kind: PersistentVolumeClaim
metadata:
name: px-amq-claim
spec:
accessModes:
- ReadWriteOnce
resources:
requests:
storage: 40Gi
storageClassName: px-activemq
_EOF
...
persistentvolumeclaim/px-amq-claim created

Services & Deployment

Enter the following combined kubectl command and spec to create the services and the deployment for them:

kubectl apply -f - <<'_EOF'
---
apiVersion: v1
kind: Service
metadata:
annotations:
description: The broker's AMQP port.
labels:
application: px
name: px-amq-amqp
spec:
ports:
- port: 5672
targetPort: 5672
selector:
deploymentConfig: px-amq
---
apiVersion: v1
kind: Service
metadata:
annotations:
description: The broker's MQTT port.
labels:
application: px
name: px-amq-mqtt
spec:
ports:
- port: 1883
targetPort: 1883
selector:
deploymentConfig: px-amq
---
apiVersion: v1
kind: Service
metadata:
annotations:
description: The broker's STOMP port.
labels:
application: px
name: px-amq-stomp
spec:
ports:
- port: 61613
targetPort: 61613
selector:
deploymentConfig: px-amq
---
apiVersion: v1
kind: Service
metadata:
annotations:
description: The broker's OpenWire port.
service.alpha.openshift.io/dependencies: '[{"name": "px-amq-amqp", "kind": "Service"},{"name": "px-amq-mqtt", "kind": "Service"},{"name": "px-amq-stomp", "kind": "Service"}]'
labels:
application: px
name: px-amq-tcp
spec:
ports:
- port: 61616
targetPort: 61616
selector:
deploymentConfig: px-amq
---
apiVersion: v1
kind: Service
metadata:
annotations:
description: Supports node discovery for mesh formation.
labels:
application: px
name: px-amq-mesh
spec:
clusterIP: None
ports:
- name: mesh
port: 61616
selector:
deploymentConfig: px-amq
---
apiVersion: extensions/v1beta1
kind: Deployment
metadata:
labels:
application: px
name: px-amq
spec:
replicas: 1
template:
metadata:
labels:
application: px
deploymentConfig: px-amq
name: px-amq
spec:
schedulerName: stork
securityContext:
runAsUser: 1000
fsGroup: 2000
runAsNonRoot: true
containers:
- env:
- name: AMQ_USER
value: admin
- name: AMQ_PASSWORD
value: admin
- name: AMQ_TRANSPORTS
value: openwire
- name: AMQ_QUEUES
value: FUSE.TEST.QUEUE
- name: AMQ_MESH_SERVICE_NAMESPACE
valueFrom:
fieldRef:
fieldPath: metadata.namespace
- name: AMQ_STORAGE_USAGE_LIMIT
value: 50 Gb
- name: AMQ_QUEUE_MEMORY_LIMIT
value: 500mb
image: registry.access.redhat.com/jboss-amq-6/amq63-openshift:1.4-27
imagePullPolicy: Always
name: px-amq
ports:
- containerPort: 8778
name: jolokia
protocol: TCP
- containerPort: 5672
name: amqp
protocol: TCP
- containerPort: 1883
name: mqtt
protocol: TCP
- containerPort: 61613
name: stomp
protocol: TCP
- containerPort: 61616
name: tcp
protocol: TCP
readinessProbe:
exec:
command:
- /bin/bash
- -c
- /opt/amq/bin/readinessProbe.sh
volumeMounts:
- mountPath: /opt/amq/data
name: data-broker-px-amq
- mountPath: /opt/amq/conf/activemq.xml
name: config-xml
subPath: activemq.xml
terminationGracePeriodSeconds: 60
volumes:
- name: config-xml
configMap:
name: active-mq-xml
- name: data-broker-px-amq
persistentVolumeClaim:
claimName: px-amq-claim
_EOF
...
service/px-amq-amqp created
service/px-amq-mqtt created
service/px-amq-stomp created
service/px-amq-tcp created
service/px-amq-mesh created
deployment.extensions/px-amq created

Once you've applied the service and deployment specs, your ActiveMQ deployment is complete.

Clean up ActiveMQ

To clean up the environment created above, enter the following kubectl command to delete all the resources that you created in the steps above:

kubectl delete \
deploy/px-amq \
svc/px-amq-amqp \
svc/px-amq-mqtt \
svc/px-amq-stomp \
svc/px-amq-tcp \
svc/px-amq-mesh \
cm/active-mq-xml \
pvc/px-amq-claim \
sc/px-activemq

The command above deletes the following:

  • The workload itself (deployment/pods)
  • Configuration (configmap)
  • Storage volumes including data (persistentvolumeclaim)
  • Volume parameters (storageclass)

References

A portion of the setup here of ActiveMQ is based on work by Francois Martel adapting the OpenShift version of JBoss ActiveMQ 6

Was this page helpful?